Cookie Img

FLP-B+C MAXI VS Class B+C Lightning Surge Protection device for line to Neutral

FLP-B+C MAXI VS Class B+C Lightning Surge Protection device for line to Neutral
FLP-B+C MAXI VS Class B+C Lightning Surge Protection device for line to Neutral
Product Code : FLP-B+C MAXI VS
Product Description

Lighting Current Arresters


SPD type 1 – combined arrester type 1 and 2

Dimension drawing Basic circuit diagram

Surge protector devices (SPD) of class B+C serve for protection of low-voltage (230/400 V AC) networks

and connected appliances against surge voltages due to direct - and indirect lightning strikes. The FLP-B+C MAXI VS SPD is built in a single block. Module offers a combination of heavy duty gas discharge tube (GDT) rated at 25 kA (10/350 μsec pulse) with high energy varistors block. This module guarantee no follow-on current, very low leakage current (μA range) and very low residual voltage. The form a part of the protection of buildings and their accessories in the concept of zone lightning protection at the boundary of the LPZ 0 and LPZ 1 (or higher) zones. § reliable arrester disconnection during overload or damaging of the protective module by thermal and dynamical varistor disconnection § optical fault indication – changing color of the signaling flag from green to red

§ low voltage Up

§ housing material according to UL 94 V0

Technical data


Nominal voltage Un

230 V AC

Maximum operating voltage Uc

260 V AC

Nominal discharge current (8/20 μs) In

30 kA

Lightning impulse current (10/350 μs) Iimp

25 kA

Maximum discharge current (8/20 μs) Imax

60 kA

Voltage protection level Up

1,5 kA

Response time ta

100 ns

Ability to independently switch off the following current Ifi

no following current

Short-circuit proof at maximum overcurrent protection

50 kArms

Maximum overcurrent protection

250 A gL/gG

Maximum overcurrent protection for serial connection

125 A gL/gG

Degree of protection

IP 20

Range of operating temperatures

– 40 °C … + 80 °C

Mounting on

DIN rail 35 mm

Cross-section of connected conductors

Solid min/max

Stranded min/max



ISO: 10/50 mm2 ; AWG: 7/1

ISO: 10/35 mm2 ; AWG: 7/2

Stripping length of the supply conductor


14 mm

Tightening torque

max. 4 Nm

Visual fault indication

red indication field

Remote indication – S design

potential-free change-over contact

Remote indication contacts

250 V / 0,5 A AC, 250 V / 0,1 A DC

Cross-section of remote indication conductors

max. 1,5 mm2

Meets the requirements of standard

EN 61643-11 + A11T1T2

Ordering number

Contact Us

Banarsi Complex, First Floor, Faizabad Road, Opp. SBI Nishatganj Branch, Lucknow, Uttar Pradesh, 226006, India
Phone :+917042637399