Surge Arresters
DL-1G RJ45
Surge arrester for Ethernet Cat. 6 Its intended for protection of line Ethernet Cat. 6 with power. Installation at the boundary of LPZ 0B–LPZ 1 and higher. Including: – holder DIN.
Technical data | DL-1G RJ45 |
Location SPD | ST 1+2+3 |
Maximum operating voltage Uc | 60 V DC |
Nominal current IL | 500 mA |
D1 total impulse current (10/350 μs) line – PE Iimp | 2 kA |
C2 nominal discharge current line - line In | 150 A |
C2 nominal discharge current (8/20 μs) line - PE In | 10 kA |
C2 voltage protection level line - line at In UP | 110 V |
C2 voltage protection level line - PE at In Up | 400 V |
C3 voltage protection level line - line at 1 kV/μs Up | 170 V |
C3 voltage protection level line - PE at 1 kV/μs Up | 350 V |
Insertion attenuation at 250 MHz | 1,5 dB |
Response time line - line ta | 1 ns |
Response time line - PE ta | 100 ns |
Degree of protection | IP 20 |
Range of operating temperatures | – 40 °C … + 60 °C |
Connection input – output | RJ 45 – RJ 45 |
Mounting on | surface on the desk/DIN rail 35 mm |
Meets the requirements of standard | EN 61643-21, EN 50173-1 |
Ordering number | 8595090540458 |